PCB film processor machine

PCB film processor machine

specification

Machine size : 1.65 * 1.08 *1.04M (L * W * H)

Film load height: 890mm, film load width: 610mm

Voltage: 220V +/-10% , 30 A, 50HZ, single phase

Machine feature:

A, water tank volume: develop tank, fixing tank, cleaning tank, all 20 Liter

B, speed, under the condition of 30 seconds developing time, input film 10mm length per second

  Mean it will take one minute to load one 24inch film

C temperature display temperature, +/-0.5℃，set the temperature grade : 0.5℃ per step,

 Control accuracy: developing and fixing - 0.5℃， dry session: 10℃

D, it had IR sensor for film load, developing area had compensation setting

E, developing tank is applied to cycle filter, minimum filter particle 0.5μm

Machine configuration

Rubber roller, made in Denmark

Convey motor: Made in Taiwan

Water tank material: developing tank 304#, fixing tank 316#,

Film moving path had reasonable design, very less hole, output film cleanly, no shrink and expand, no tolerance on line width