after drilling single double side PCB deburring machine

after drilling single double side PCB deburring machine 

feature: 

it's designed for remove the burr after CCL drilling process, automatically grinding the burr caused by drilling. the ccl panel surface get smooth & bright after deburring. it offer strong quality assurance for PCB hole, work as one of the important equipment in PCB factory

it adjust the grinding thickness automatically thru servo motor with automatic recognise fuction

it use full close structure, so that debris & dust were collected more than 98% 

easy to use, save labor and time, low noise and enviroment protection

Specification:

Model: 650

working width: 0- 650mm

deburr thickness adjust : automatic 

minimum deburr length: 160mm

deburr thickness: 0.4 - 3.0mm

convey speed: 0 -12Meter / min

Voltage: AC380V/50HZ

Machine power: 3KW

machine size: 1750*980*110mm

Air: 0.5 -0.8MPA

Dust collect tube: φ76mm

Net Weight: 550Kg

Belt type: A1750

Consumable material: sand belt