PCB Hole inspection machine
Few holes, slot length, width, angle, round hole debris (burrs), slot debris (micro
Small tin-copper slag can also be detected), detection of board contour defects
Hole counting machine
Inspection theory: Using LED light to penetrate through the holes on the PCB board to produce shadows
Like, calculate the area and outline of the hole, and compare it with the data of the board, so as to calculate the hole
Is it normal
application: suitable for inspection after drilling, after electroplating, after tin spraying and before shipment of finished
Products Inspection, high stability for BGA small hole inspection, can detect large holes, small holes, porous,
Few holes, slot length, width, angle, round hole debris (burrs), slot debris (micro
Small tin-copper slag can also be detected), detection of board contour defects
|
Inspect range of pcb size |
Max 650*750mm, Min 80*120mm |
|
Minimum hole for inspect |
0.1mm |
|
Pcb panel thickness |
0.3-10mm |
|
Max quantity of pcb hole |
500000 holes |
|
Allow +/- 30 °load panel |
yes |
|
Tolerance setting |
Set the tolerance for round hole & non-round hole |
|
Cover function |
Hole, edge, diameter |
|
Repeat accuracy |
+/-15μm |
|
Inspect speed |
2.5M / 5M / 7.5M/ 12.5M per minutes (adjustable) |
|
Optic specification |
|
|
Focus adjust |
By software automatically |
|
Light source adjust |
LED + tune button |
|
Optic system |
CCD (2400DPI) |
|
Optic resolution |
21μm |
|
Light source mode |
Penetrating light |
|
Machine size: |
1540*1100*1200mm |
|
Air pressure |
5kg/cm2 |
|
Machine voltage |
220V/ 10A/ 50/60HZ/ 1.5KVA |
